
- TRUF BEARINGS LIMITED
- Angular Contact Ball Bearings Cam Follower and Track Roller - Stud Type Cartridge Unit Bearings
- AddressCalle 2689 No.25, Zona Industrial, 940, Guadalajara, Jalisco, Mexico
- Phone(Working Time)+52-33-5432-1448
- Phone(Nonworking Time)+52-33-5432-1448
Pillow Block Bearings
Contact NowPillow Block Bearings Pillow blocks, the most commonly used type of mounted units, are designed to provide shaft support where the mounting surface is parallel to the shaft axis. The bolt holes are usually slotted for adjustment during mounting. Pillow blocks are supplied in a variety of configurations.Pillow block bearings, sometimes referred to as plummer block bearings, are mounted bearings that are used to provide load support for a rotating shaft. Their mounting surface is on a plane parallel and offset to the axis of the shaft. Mounting holes or slots in the base or feet of pillow block bearings permit adjustment and easy mounting.
Pillow block bearings are a typical style of bearing. These bearings are composed of a self-aligning ball bearing (the commonly used type) and plummer block. They can be attached to a shaft by fastening a ball retaining screw.
2.188 Inch | 55.575 Millimeter x 3.313 Inch | 84.14 Millimeter x 2.5 Inch | 63.5 Millimeter REXNORD ZAS2203 Pillow Block Bearings
2700 rpm | 160.0000 mm |
65.000 mm | 4800 rpm |
2.688 Inch | 68.275 Millimeter x 4.531 Inch | 115.09 Millimeter x 3.5 Inch | 88.9 Millimeter REXNORD ZAFS6211 Pillow Block Bearings
B00308 | Single Row Ball Bear |
Ball Bearing | 24,000 rpm |
2.938 Inch | 74.625 Millimeter x 4.531 Inch | 115.09 Millimeter x 3.75 Inch | 95.25 Millimeter REXNORD ZAFS6215 Pillow Block Bearings
SP206-207/62- | 41 mm |
UC206-20G2 | -20 °C |